Industrial Yellow Insulation PE Pipe Extrusion Machine Cooling Fan 6 Section 250W

Single-screw insulation pipe production line extruder machine plastic extruder machine

preface
Vacuum sizing is one of the main methods of plastic pipe setting. There are two purposes of vacuum sizing: one is to obtain the exact size; the other is to make the plastic along the inner wall of the sizing sleeve. By establishing the pressure difference between the inner cavity and the wall of the tube, the outer surface of the tube is adsorbed on the fixed diameter sleeve, and the outer diameter and wall thickness are obtained.
to configure:
I, the host
1, the screw and cylinder of 120 x 30:1, material 38CrMoALA, depth of 0.4-0.7, brittleness is less than two.
2, toothed surface reducer, made of high strength alloy steel material, gear after carburizing and quenching, grinding process. The machine has the characteristics of small size, high carrying capacity, stable transmission, low noise, high efficiency and so on.
3, frequency conversion motor: power 110KW
4, cooling fan: 6 section 250W
5, ceramic heater: 6 section 50KW
6, automatic feeding machine: BL-300
7, drying machine
8, temperature sensor, temperature controller, automatic temperature control.
9, the original CHINT, Delixi electrical appliances.
II, head of the 420 body: a material by 40Gr, the exquisite high strength.
III, setting the water jacket material: high quality brass, specifications: (phi 250-800)
IV, vacuum setting box
1, vacuum molding box: material for stainless steel, length of 6 meters.
3, built-in stainless steel pipe: 8 pipes, water pipe is provided with a multi ABS nozzle, more fully cooling.
4, horizontal centrifugal pump: 4KW 2
5, vacuum pump: 5.5KW 1, 4KW 1
6, before and after the mobile device: 4KW planetary gear reducer 1
V, cooling box
1, water tank: material for stainless steel.
2, cooling box length of 5 meters 1 sets
Built in 3, 6 water pipes, water pipe is provided with a multi ABS nozzle, fully cooling products.
4, horizontal centrifugal pump: 4KW 1
VI, water system
1, wind ring
2, ball valve
3, change to blow mouth
VII, traction machine
1, traction inverter motor power: 7.5KW
2, clamping motor: 2.2KW
8, 3 groups of traction claw.
4, universal joint transmission
5, electric locking; sliding block to support the block frame, so that it moves up and down, complete lock, loosen
6, traction line speed 0.35-1.5m/min
7, traction diameter range: Phi 300- Phi 600
8, traction machine center high 1100mm.
VIII, planetary cutting machine
1, cutting motor 3KW.
2, a revolution motor 4W
3, cutter hydraulic control
4, fan 370W
5, cutting blade of 180 * 2.2 * 60T
6, milling cutter characteristics
7, the cutting range: Phi 250- Phi 800
IX, sports car

Advantages:

1. good service
2. good extrusion ability
3. good product application
4. power saving
5. easy operation

Application:

1, pure water, drinking water pipeline;
2, industrial water and chemical transport, emissions;
3, domestic hot and cold water pipe system;
4, beverage, drug delivery systems of production;
5, compressed air pipe;
6, other industrial, agricultural management